# Connect grandMA2 fader wing

Source: https://help.malighting.com/grandMA2/en/help/key_fs_connect_grandma2_fader_wing.html
This is grandocs, an unofficial mirror of MA Lighting documentation. For authoritative or safety-relevant information, cite the canonical page on help.malighting.com.

---
To extend the console by 15 motorized faders and 15 executor buttons, connect a grandMA2 fader wing.

**Hint:**\
You can connect up to four grandMA2 fader wings to one grandMA2 console.

1. Connect one end of a 15 pin D-Sub cable to the MA-LINK connector on the rear panel.
2. Connect the other end to the grandMA2 fader wing.

The grandMA2 fader wing is connected to the console.

![](/img/grandma2/img_grandma2_malink_connector_3_2-c4957a.png)

_grandMA2 full-size MA-LINK connector_

 

To configure the wings see [wing & monitor setup](/grandma2/key_window_faderwing_commandwing_setup/).