# Create a Session

Source: https://help.malighting.com/grandMA3/2.3/HTML/network_session_create.html
This is grandocs, an unofficial mirror of MA Lighting documentation. For authoritative or safety-relevant information, cite the canonical page on help.malighting.com.

---
**Requirement:**

Network connections need to be made, and the correct IP address should be set - For more information, see [Interfaces and IP](/grandma3/2-3/network_interface/).

## Create a Session with the User Interface

1. Open the Network menu.
2. Tap the buttons at the bottom that need to be edited.\
   \- Make sure that the correct interface is selected.\
   \- Make sure the Session name and Location values are correct.\
   \- Make sure the correct Key is selected.
3. If the network connection is disabled (the network icon (![](/img/grandma3/2-3/icon_network_15-928d88.png)) in the [Command Line](/grandma3/2-3/ws_ui_command_line/) is red), then tap the big enable/disable button in the lower right corner of the Network menu.\
   \- The network icon should become green.