This page describes the syntax and how to use the fade command.
To go to the fade command it is necessary to press another function key before, e.g. Store Time (=Fade).
Description
Section titled “Description”With the fade command, you indicate fade times
- to go to a cue with a fade time
- for a new created cue with fade time
- in a existing cue
Syntax
Section titled “Syntax”1. Go to cue 2 with a fade time of 3 seconds.
Goto Cue 2 Fade 3
2. Create a new cue 1 with a fade time of 3 seconds.
Store Cue 1 Fade 3
3. Assign a fade time of 5 seconds to the existing cue 3 on executor 1.
Assign Fade 3 Cue 1 Executor 1
Example 1
Section titled “Example 1”Let´s assume, you will go to cue 2 on executor 1 with a fade time of 3 seconds.
Press Goto Cue 2 Exec 1 Time (=Fade) 3 Please.
The console goes to cue 2 on executor 1 with a fade time of 3 seconds.
Example 2
Section titled “Example 2”Let´s assume, you will store a new cue 1 on the main executor with a fade time of 3 seconds.
Press Store 1 (= Cue 1) Time (=Fade) 3 Please.
Cue 1 is stored on the main executor with a fade time of 3 seconds.
Example 3
Section titled “Example 3”Let´s assume, you will assign the existing cue 3 on executor 1 with a fade time of 5 seconds.
Press 
+ Label (=Assign) Time (=Fade) 5 Cue 3 Exec 1 Please.
Double check the fade time in the cues view.